Sana Software

Please describe your company, your role, and the industry you operate in.

Ironbark Software Pty Ltd is a Construction business based in Adelaide, Australia. As Co-Founder, I own the technology strategy and vendor relationships. Every spending decision gets evaluated against a concrete business case — we do not invest in technology for its own sake.

What specific problem or business challenge led you to hire this company?

We had a clear product vision for our next growth phase in the Construction market but the Low-Code / No-Code Development expertise we needed was not something we could recruit for on our timeline. An external specialist was the pragmatic answer.

What services did the company provide for your project?

End-to-end Low-Code / No-Code Development delivery with particular focus on the data migration and integration workstreams, which carried the highest project risk. A dedicated QA resource was embedded throughout development and they left us with a proper operations runbook at handover.

Why did you choose this company over other providers you considered?

The questions they asked during the briefing were the first signal. Vendors who ask precise questions in the sales process tend to apply the same discipline during delivery. The technical proposal was detailed, the team was senior, and the pricing was transparent. All three were factors.

How clearly did the company understand your requirements and business goals?

Thoroughly. The requirements document they produced was detailed enough that our QA team used it directly to write acceptance criteria. Every story had a defined business outcome attached. Nothing was left to interpretation, which paid dividends all the way through to testing.

How was your overall experience with their communication and project management?

Professional and efficient. The PM had a clear view of the critical path at all times and was transparent when anything threatened it. We made one significant scope change mid-project. It was handled through a proper change request, fairly priced, and absorbed without disrupting the delivery timeline.

Did the company deliver the project on time and within your expected budget?

Yes. The estimates they provided during scoping proved accurate throughout delivery, which is rare. Most vendor estimates start optimistic and drift. These did not.

What tangible results or business impact have you seen since the project was completed?

The ROI case we presented to the board was intentionally conservative. We are tracking to hit the payback point in under twelve months against an eighteen-month model. The efficiency gains have exceeded the forecast, partly because the data quality the new system produces enables decisions the previous one could not support.

What did you like most about working with this company?

Honestly, the quality of the questions they asked. It sounds simple but good questions at the start of a project make everything easier. Their discovery process was better than any briefing our internal team would have run independently.

Would you recommend this company to others, and would you work with them again?

Absolutely. We are scoping a second engagement and I expect this to become a multi-year partnership. For anyone in the Construction space looking for serious Low-Code / No-Code Development delivery, I would put them at the top of the evaluation list.

Please describe your company, your role, and the industry you operate in.

I am the Product Manager at Colosseum Digital Srl, a Automotive company headquartered in Rome, Italy. My role covers product, platform, and the vendor partnerships that support them. We had reached a point where our internal team could not execute our roadmap fast enough without outside help.

What specific problem or business challenge led you to hire this company?

A competitor move accelerated our timeline by six months. A Industry-Specific Solutions investment that had been planned for next year suddenly needed to happen now. Internal build was not viable — we needed to find the right external team quickly.

What services did the company provide for your project?

Full Industry-Specific Solutions lifecycle — discovery, architecture, development across ten sprints, integration testing, performance validation, production deployment, and a four-week hypercare period. They also produced system documentation and ran structured knowledge transfer sessions for our team.

Why did you choose this company over other providers you considered?

We had a fixed budget and a non-negotiable timeline. Several vendors told us it could not be done. These were the ones who said it could and explained clearly why. They turned out to be right.

How clearly did the company understand your requirements and business goals?

Honestly, better than we understood them ourselves going in. The workshops they ran surfaced assumptions we had not examined and caught three requirements that were in direct conflict with each other. Resolving those before development started saved us a significant amount of rework.

How was your overall experience with their communication and project management?

Good. The sprint cadence worked well for our team. Fortnightly reviews gave us the checkpoints we needed. The one friction point — time zone overlap — was resolved after the first sprint and did not reoccur.

Did the company deliver the project on time and within your expected budget?

Yes. I had privately planned for a contingency given the integration complexity involved. None of it was needed. Final invoice came in within rounding of the approved budget and we launched on the agreed date. That outcome is less common than vendors would have you believe.

What tangible results or business impact have you seen since the project was completed?

Hard to isolate perfectly given other business variables, but the metrics attributable to the Industry-Specific Solutions work are meaningful — session time up, conversion up, error rate down, NPS for the digital channel improved by double digits. Account managers say it is coming up positively in client conversations for the first time.

What did you like most about working with this company?

Honestly, the quality of the questions they asked. It sounds simple but good questions at the start of a project make everything easier. Their discovery process was better than any briefing our internal team would have run independently.

Would you recommend this company to others, and would you work with them again?

I already have. Three people in my network have used them based on my recommendation and all three have reported positively. That is the only endorsement that matters.

Please describe your company, your role, and the industry you operate in.

We are a Gaming & Gambling company based in Incheon, South Korea. My role as Director of Platform at Hanam Tech Solutions means I sit at the intersection of business goals and technical delivery — which means I care a lot about vendors who can translate between both.

What specific problem or business challenge led you to hire this company?

Our internal team was good but maxed out. The Quality Assurance & Testing work needed for this phase of the product required a depth of experience we did not have internally, and could not build in time.

What services did the company provide for your project?

End-to-end Quality Assurance & Testing delivery with particular focus on the data migration and integration workstreams, which carried the highest project risk. A dedicated QA resource was embedded throughout development and they left us with a proper operations runbook at handover.

Why did you choose this company over other providers you considered?

We had a fixed budget and a non-negotiable timeline. Several vendors told us it could not be done. These were the ones who said it could and explained clearly why. They turned out to be right.

How clearly did the company understand your requirements and business goals?

Extremely well — partly because they had enough Gaming & Gambling context to ask the right questions without us having to explain the basics. The functional spec translated our business requirements into technical language with a precision that meant the development phase had almost no clarification cycles.

How was your overall experience with their communication and project management?

Professional and efficient. The PM had a clear view of the critical path at all times and was transparent when anything threatened it. We made one significant scope change mid-project. It was handled through a proper change request, fairly priced, and absorbed without disrupting the delivery timeline.

Did the company deliver the project on time and within your expected budget?

On time. Budget was within the approved ceiling, including one scope addition we introduced mid-project that was quoted fairly and handled in parallel without affecting the main delivery stream. No surprises at invoice stage.

What tangible results or business impact have you seen since the project was completed?

Hard to isolate perfectly given other business variables, but the metrics attributable to the Quality Assurance & Testing work are meaningful — session time up, conversion up, error rate down, NPS for the digital channel improved by double digits. Account managers say it is coming up positively in client conversations for the first time.

What did you like most about working with this company?

Team continuity. The engineers who ran the discovery sessions built the system. That consistency over a five-month engagement is valuable in ways that are hard to articulate until you have worked on projects where it was absent. Every conversation built on the previous ones.

Would you recommend this company to others, and would you work with them again?

Yes. I would specifically recommend them for Quality Assurance & Testing projects where getting the requirements right at the start is critical. That is where they earn their fees — and the downstream delivery reflects it.

Please describe your company, your role, and the industry you operate in.

We are a Construction company based in Rotterdam, Netherlands. My role as Senior Product Manager at Polder SaaS BV means I sit at the intersection of business goals and technical delivery — which means I care a lot about vendors who can translate between both.

What specific problem or business challenge led you to hire this company?

Compliance requirements in our Construction space changed and the deadline was set by our regulator, not by us. The Industry-Specific Solutions work required was specialist enough that pulling our internal team off the product roadmap to do it was not an option.

What services did the company provide for your project?

The core engagement was Industry-Specific Solutions delivery. During discovery they also provided technical consultancy that materially improved our requirements — things we would not have caught until development if they had not raised them. They also took ownership of the third-party integrations that had caused problems in previous projects.

Why did you choose this company over other providers you considered?

A peer in the Construction sector had used them for a similar Industry-Specific Solutions engagement and recommended them without qualification. Our own due diligence confirmed the picture they described. The combination of domain knowledge and delivery track record made the decision straightforward.

How clearly did the company understand your requirements and business goals?

Very well. The discovery process was more thorough than anything we had experienced before. They challenged requirements that were vague, proposed better alternatives where our thinking was limiting, and produced a spec that our stakeholders agreed was the clearest articulation of the product they had ever seen written down.

How was your overall experience with their communication and project management?

Communication was proactive and well-calibrated. Technical detail for the engineering audience, executive summaries for the steering group, and risks raised with proposed mitigations rather than just problem statements. The fortnightly sprint reviews kept our stakeholders informed without pulling them into every working session.

Did the company deliver the project on time and within your expected budget?

Yes on both. There was one sprint where a third-party API dependency introduced a one-week slip. They flagged it three weeks before it became critical, presented two options, and we agreed on one that recovered the timeline within the same sprint. That kind of foresight is the difference between good and average project management.

What tangible results or business impact have you seen since the project was completed?

We went live six weeks ago so it is early. The launch was clean, adoption is tracking ahead of plan, and the first client demo of the new platform generated a positive reaction we had not seen for the previous version. Ask me again in six months and I will have better numbers.

What did you like most about working with this company?

The directness. When our requirements were unclear, they said so. When our priorities were contradictory, they explained why. When a technical approach we assumed was right had significant downsides, they told us before we committed. That kind of honesty is what I actually want from a technology partner.

Would you recommend this company to others, and would you work with them again?

Yes, without reservation. I have already referred two peers in the Construction sector who were facing similar Industry-Specific Solutions challenges. I gave those referrals confidently because I know the experience I described was not a one-off — it reflects how they work.

Please describe your company, your role, and the industry you operate in.

Catalonia Digital SL is a Construction business based in Barcelona, Spain. As Head of Digital Products, I own the technology strategy and vendor relationships. Every spending decision gets evaluated against a concrete business case — we do not invest in technology for its own sake.

What specific problem or business challenge led you to hire this company?

Compliance requirements in our Construction space changed and the deadline was set by our regulator, not by us. The POS System Development work required was specialist enough that pulling our internal team off the product roadmap to do it was not an option.

What services did the company provide for your project?

POS System Development design and build, plus the performance testing that revealed an architecture concern we needed to address before launch. The testing investment paid for itself. They also handled the deployment pipeline and monitoring configuration, which our internal team had not budgeted time for.

Why did you choose this company over other providers you considered?

A peer in the Construction sector had used them for a similar POS System Development engagement and recommended them without qualification. Our own due diligence confirmed the picture they described. The combination of domain knowledge and delivery track record made the decision straightforward.

How clearly did the company understand your requirements and business goals?

Honestly, better than we understood them ourselves going in. The workshops they ran surfaced assumptions we had not examined and caught three requirements that were in direct conflict with each other. Resolving those before development started saved us a significant amount of rework.

How was your overall experience with their communication and project management?

I used to chase status updates weekly on vendor engagements. This was the first time I did not have to. Updates came consistently, problems surfaced early, and the shared project board always reflected reality rather than optimism.

Did the company deliver the project on time and within your expected budget?

Yes. The estimates they provided during scoping proved accurate throughout delivery, which is rare. Most vendor estimates start optimistic and drift. These did not.

What tangible results or business impact have you seen since the project was completed?

Biggest impact: our internal team is no longer spending three days a week maintaining a platform they hated working with. That productivity is now going into building. The platform change was as much about our engineering team's quality of life as it was about the end user.

What did you like most about working with this company?

The post-launch engagement. Some vendors treat go-live as the end of their obligation. This team treated it as a transition to a different kind of engagement. Hypercare was substantive, documentation was genuinely useful, and they checked in proactively at thirty and ninety days.

Would you recommend this company to others, and would you work with them again?

Yes, without reservation. I have already referred two peers in the Construction sector who were facing similar POS System Development challenges. I gave those referrals confidently because I know the experience I described was not a one-off — it reflects how they work.