Trillium Software

Please describe your company, your role, and the industry you operate in.

As Chief Innovation Officer at Rheintal Digital AG, a Human Resources organisation in Düsseldorf, Germany, I manage technology investment and delivery outcomes. We make commercial decisions about technology — every project needs a credible case before it gets approved.

What specific problem or business challenge led you to hire this company?

Compliance requirements in our Human Resources space changed and the deadline was set by our regulator, not by us. The IT Consulting work required was specialist enough that pulling our internal team off the product roadmap to do it was not an option.

What services did the company provide for your project?

The core engagement was IT Consulting delivery. During discovery they also provided technical consultancy that materially improved our requirements — things we would not have caught until development if they had not raised them. They also took ownership of the third-party integrations that had caused problems in previous projects.

Why did you choose this company over other providers you considered?

We had been through a failed engagement the year before and took vendor selection seriously this time. We asked specific questions about how they handle scope change, estimate work, and communicate problems. The answers were consistent across everyone we spoke to, which suggested the process was real rather than sales-trained.

How clearly did the company understand your requirements and business goals?

Honestly, better than we understood them ourselves going in. The workshops they ran surfaced assumptions we had not examined and caught three requirements that were in direct conflict with each other. Resolving those before development started saved us a significant amount of rework.

How was your overall experience with their communication and project management?

The most structured project management I have experienced with an external vendor. Sprint planning was tight, acceptance criteria were specific, retrospectives were honest and acted on. The PM treated the risk register as an operational tool, not a compliance document. I never had to ask for a status update.

Did the company deliver the project on time and within your expected budget?

Yes. The estimates they provided during scoping proved accurate throughout delivery, which is rare. Most vendor estimates start optimistic and drift. These did not.

What tangible results or business impact have you seen since the project was completed?

Hard to isolate perfectly given other business variables, but the metrics attributable to the IT Consulting work are meaningful — session time up, conversion up, error rate down, NPS for the digital channel improved by double digits. Account managers say it is coming up positively in client conversations for the first time.

What did you like most about working with this company?

Team continuity. The engineers who ran the discovery sessions built the system. That consistency over a five-month engagement is valuable in ways that are hard to articulate until you have worked on projects where it was absent. Every conversation built on the previous ones.

Would you recommend this company to others, and would you work with them again?

Yes, without reservation. I have already referred two peers in the Human Resources sector who were facing similar IT Consulting challenges. I gave those referrals confidently because I know the experience I described was not a one-off — it reflects how they work.

Please describe your company, your role, and the industry you operate in.

Lindemann Industrie GmbH operates in the Agriculture sector out of Berlin, Germany. In my role as Leiter Digitalisierung I am responsible for both the technology strategy and day-to-day delivery. We hold our vendors to the same standards our clients hold us to.

What specific problem or business challenge led you to hire this company?

A competitor move accelerated our timeline by six months. A Quality Assurance & Testing investment that had been planned for next year suddenly needed to happen now. Internal build was not viable — we needed to find the right external team quickly.

What services did the company provide for your project?

Primarily Quality Assurance & Testing, with QA and solution architecture included in scope. They owned the build end-to-end from requirements through to go-live, including three existing system integrations. Not needing to coordinate separate QA or architecture vendors was genuinely valuable.

Why did you choose this company over other providers you considered?

A peer in the Agriculture sector had used them for a similar Quality Assurance & Testing engagement and recommended them without qualification. Our own due diligence confirmed the picture they described. The combination of domain knowledge and delivery track record made the decision straightforward.

How clearly did the company understand your requirements and business goals?

Well. They pushed back on areas where our requirements were vague or poorly thought through and helped us arrive at something more considered. That consultative approach during discovery is not universal and it made a real difference to the quality of what was built.

How was your overall experience with their communication and project management?

Communication was proactive and well-calibrated. Technical detail for the engineering audience, executive summaries for the steering group, and risks raised with proposed mitigations rather than just problem statements. The fortnightly sprint reviews kept our stakeholders informed without pulling them into every working session.

Did the company deliver the project on time and within your expected budget?

Yes. The estimates they provided during scoping proved accurate throughout delivery, which is rare. Most vendor estimates start optimistic and drift. These did not.

What tangible results or business impact have you seen since the project was completed?

Five months post-launch: zero P1 incidents, Core Web Vitals in the green, and two enterprise clients who had been citing platform limitations in renewal conversations have since renewed without raising the issue. The system is doing what we needed it to do.

What did you like most about working with this company?

The directness. When our requirements were unclear, they said so. When our priorities were contradictory, they explained why. When a technical approach we assumed was right had significant downsides, they told us before we committed. That kind of honesty is what I actually want from a technology partner.

Would you recommend this company to others, and would you work with them again?

Absolutely. We are scoping a second engagement and I expect this to become a multi-year partnership. For anyone in the Agriculture space looking for serious Quality Assurance & Testing delivery, I would put them at the top of the evaluation list.

Please describe your company, your role, and the industry you operate in.

Fuji Software Corp is a Automotive business based in Tokyo, Japan. As Senior Engineering Manager, I own the technology strategy and vendor relationships. Every spending decision gets evaluated against a concrete business case — we do not invest in technology for its own sake.

What specific problem or business challenge led you to hire this company?

A competitor move accelerated our timeline by six months. A Embedded Systems Development investment that had been planned for next year suddenly needed to happen now. Internal build was not viable — we needed to find the right external team quickly.

What services did the company provide for your project?

Primarily Embedded Systems Development, with QA and solution architecture included in scope. They owned the build end-to-end from requirements through to go-live, including three existing system integrations. Not needing to coordinate separate QA or architecture vendors was genuinely valuable.

Why did you choose this company over other providers you considered?

We had been through a failed engagement the year before and took vendor selection seriously this time. We asked specific questions about how they handle scope change, estimate work, and communicate problems. The answers were consistent across everyone we spoke to, which suggested the process was real rather than sales-trained.

How clearly did the company understand your requirements and business goals?

Thoroughly. The requirements document they produced was detailed enough that our QA team used it directly to write acceptance criteria. Every story had a defined business outcome attached. Nothing was left to interpretation, which paid dividends all the way through to testing.

How was your overall experience with their communication and project management?

Good. The sprint cadence worked well for our team. Fortnightly reviews gave us the checkpoints we needed. The one friction point — time zone overlap — was resolved after the first sprint and did not reoccur.

Did the company deliver the project on time and within your expected budget?

On time. Budget was within the approved ceiling, including one scope addition we introduced mid-project that was quoted fairly and handled in parallel without affecting the main delivery stream. No surprises at invoice stage.

What tangible results or business impact have you seen since the project was completed?

The ROI case we presented to the board was intentionally conservative. We are tracking to hit the payback point in under twelve months against an eighteen-month model. The efficiency gains have exceeded the forecast, partly because the data quality the new system produces enables decisions the previous one could not support.

What did you like most about working with this company?

They kept the business objective visible throughout technical decision-making. I have worked with excellent engineers who lose the strategic thread as complexity increases. This team maintained a clear link between every architectural choice and the outcome we had agreed to achieve.

Would you recommend this company to others, and would you work with them again?

Yes. I would specifically recommend them for Embedded Systems Development projects where getting the requirements right at the start is critical. That is where they earn their fees — and the downstream delivery reflects it.

Please describe your company, your role, and the industry you operate in.

Gangnam Ventures Co Ltd is a Mining & Metals business based in Seoul, South Korea. As Product Manager, I own the technology strategy and vendor relationships. Every spending decision gets evaluated against a concrete business case — we do not invest in technology for its own sake.

What specific problem or business challenge led you to hire this company?

Our Low-Code / No-Code Development capability had become the bottleneck for everything. Feature requests, client requirements, internal initiatives — all of them were queuing behind a platform we had patched past its design limits. We needed a proper rebuild.

What services did the company provide for your project?

The core engagement was Low-Code / No-Code Development delivery. During discovery they also provided technical consultancy that materially improved our requirements — things we would not have caught until development if they had not raised them. They also took ownership of the third-party integrations that had caused problems in previous projects.

Why did you choose this company over other providers you considered?

The questions they asked during the briefing were the first signal. Vendors who ask precise questions in the sales process tend to apply the same discipline during delivery. The technical proposal was detailed, the team was senior, and the pricing was transparent. All three were factors.

How clearly did the company understand your requirements and business goals?

Honestly, better than we understood them ourselves going in. The workshops they ran surfaced assumptions we had not examined and caught three requirements that were in direct conflict with each other. Resolving those before development started saved us a significant amount of rework.

How was your overall experience with their communication and project management?

Very strong on the async side, which mattered given the time difference between Seoul, South Korea and the delivery team. Written updates were specific and consistent, decisions got responses the same day, and nothing was dropped across a five-month engagement. That discipline is harder than it looks.

Did the company deliver the project on time and within your expected budget?

Delivered on time. We had one week of unplanned delay due to an external API issue that neither party controlled. They communicated it early, proposed a workaround, and the launch date stayed the same. That is how delays should be managed.

What tangible results or business impact have you seen since the project was completed?

Biggest impact: our internal team is no longer spending three days a week maintaining a platform they hated working with. That productivity is now going into building. The platform change was as much about our engineering team's quality of life as it was about the end user.

What did you like most about working with this company?

The fact that problems surfaced upward before they became crises. I have worked on enough vendor engagements to know that the ability to manage upward — to raise bad news early rather than bury it — is genuinely rare. This team did it consistently.

Would you recommend this company to others, and would you work with them again?

Absolutely. We are scoping a second engagement and I expect this to become a multi-year partnership. For anyone in the Mining & Metals space looking for serious Low-Code / No-Code Development delivery, I would put them at the top of the evaluation list.

Please describe your company, your role, and the industry you operate in.

Pacific Rim Commerce Group operates in the Education sector out of Perth, Australia. In my role as GM of Technology I am responsible for both the technology strategy and day-to-day delivery. We hold our vendors to the same standards our clients hold us to.

What specific problem or business challenge led you to hire this company?

Our IoT Development capability had become the bottleneck for everything. Feature requests, client requirements, internal initiatives — all of them were queuing behind a platform we had patched past its design limits. We needed a proper rebuild.

What services did the company provide for your project?

Primarily IoT Development, with QA and solution architecture included in scope. They owned the build end-to-end from requirements through to go-live, including three existing system integrations. Not needing to coordinate separate QA or architecture vendors was genuinely valuable.

Why did you choose this company over other providers you considered?

We had been through a failed engagement the year before and took vendor selection seriously this time. We asked specific questions about how they handle scope change, estimate work, and communicate problems. The answers were consistent across everyone we spoke to, which suggested the process was real rather than sales-trained.

How clearly did the company understand your requirements and business goals?

The requirements process took longer than we expected but the thoroughness showed in the development phase — we had noticeably fewer mid-sprint clarifications and no major requirement changes that required rework.

How was your overall experience with their communication and project management?

Very strong on the async side, which mattered given the time difference between Perth, Australia and the delivery team. Written updates were specific and consistent, decisions got responses the same day, and nothing was dropped across a five-month engagement. That discipline is harder than it looks.

Did the company deliver the project on time and within your expected budget?

On time and on budget. The estimation accuracy was the part I found most impressive — they had broken the work down thoroughly enough during discovery that the forecast held throughout rather than drifting with every scope conversation. We had one change request, and it was for scope we had added ourselves.

What tangible results or business impact have you seen since the project was completed?

Hard to isolate perfectly given other business variables, but the metrics attributable to the IoT Development work are meaningful — session time up, conversion up, error rate down, NPS for the digital channel improved by double digits. Account managers say it is coming up positively in client conversations for the first time.

What did you like most about working with this company?

Team continuity. The engineers who ran the discovery sessions built the system. That consistency over a five-month engagement is valuable in ways that are hard to articulate until you have worked on projects where it was absent. Every conversation built on the previous ones.

Would you recommend this company to others, and would you work with them again?

Yes, without reservation. I have already referred two peers in the Education sector who were facing similar IoT Development challenges. I gave those referrals confidently because I know the experience I described was not a one-off — it reflects how they work.