Zurich Technologies

Please describe your company, your role, and the industry you operate in.

We are a Manufacturing company based in Portland, OR, USA. My role as Senior Product Manager at Harbor Point Consulting means I sit at the intersection of business goals and technical delivery — which means I care a lot about vendors who can translate between both.

What specific problem or business challenge led you to hire this company?

Honestly, we had been deferring this IT Consulting investment for eighteen months. User feedback had been consistent and our conversion data confirmed the impact. We eventually ran out of reasons to delay.

What services did the company provide for your project?

Full IT Consulting lifecycle — discovery, architecture, development across ten sprints, integration testing, performance validation, production deployment, and a four-week hypercare period. They also produced system documentation and ran structured knowledge transfer sessions for our team.

Why did you choose this company over other providers you considered?

We shortlisted five vendors. Two were eliminated immediately based on the technical proposals. Of the remaining three, this team's IT Consulting approach was the most specific and evidenced — actual Manufacturing reference cases, not generic slides. The reference calls confirmed what the proposal described.

How clearly did the company understand your requirements and business goals?

Honestly, better than we understood them ourselves going in. The workshops they ran surfaced assumptions we had not examined and caught three requirements that were in direct conflict with each other. Resolving those before development started saved us a significant amount of rework.

How was your overall experience with their communication and project management?

I used to chase status updates weekly on vendor engagements. This was the first time I did not have to. Updates came consistently, problems surfaced early, and the shared project board always reflected reality rather than optimism.

Did the company deliver the project on time and within your expected budget?

On time and on budget. The estimation accuracy was the part I found most impressive — they had broken the work down thoroughly enough during discovery that the forecast held throughout rather than drifting with every scope conversation. We had one change request, and it was for scope we had added ourselves.

What tangible results or business impact have you seen since the project was completed?

Biggest impact: our internal team is no longer spending three days a week maintaining a platform they hated working with. That productivity is now going into building. The platform change was as much about our engineering team's quality of life as it was about the end user.

What did you like most about working with this company?

Team continuity. The engineers who ran the discovery sessions built the system. That consistency over a five-month engagement is valuable in ways that are hard to articulate until you have worked on projects where it was absent. Every conversation built on the previous ones.

Would you recommend this company to others, and would you work with them again?

Absolutely. We are scoping a second engagement and I expect this to become a multi-year partnership. For anyone in the Manufacturing space looking for serious IT Consulting delivery, I would put them at the top of the evaluation list.

Please describe your company, your role, and the industry you operate in.

As Head of Technology at Highveld Tech Pty Ltd, a Fashion & Apparel organisation in Johannesburg, South Africa, I manage technology investment and delivery outcomes. We make commercial decisions about technology — every project needs a credible case before it gets approved.

What specific problem or business challenge led you to hire this company?

Compliance requirements in our Fashion & Apparel space changed and the deadline was set by our regulator, not by us. The AR/VR Development work required was specialist enough that pulling our internal team off the product roadmap to do it was not an option.

What services did the company provide for your project?

Full AR/VR Development lifecycle — discovery, architecture, development across ten sprints, integration testing, performance validation, production deployment, and a four-week hypercare period. They also produced system documentation and ran structured knowledge transfer sessions for our team.

Why did you choose this company over other providers you considered?

We had been through a failed engagement the year before and took vendor selection seriously this time. We asked specific questions about how they handle scope change, estimate work, and communicate problems. The answers were consistent across everyone we spoke to, which suggested the process was real rather than sales-trained.

How clearly did the company understand your requirements and business goals?

Honestly, better than we understood them ourselves going in. The workshops they ran surfaced assumptions we had not examined and caught three requirements that were in direct conflict with each other. Resolving those before development started saved us a significant amount of rework.

How was your overall experience with their communication and project management?

Good. The sprint cadence worked well for our team. Fortnightly reviews gave us the checkpoints we needed. The one friction point — time zone overlap — was resolved after the first sprint and did not reoccur.

Did the company deliver the project on time and within your expected budget?

Delivered on time. We had one week of unplanned delay due to an external API issue that neither party controlled. They communicated it early, proposed a workaround, and the launch date stayed the same. That is how delays should be managed.

What tangible results or business impact have you seen since the project was completed?

We went live six weeks ago so it is early. The launch was clean, adoption is tracking ahead of plan, and the first client demo of the new platform generated a positive reaction we had not seen for the previous version. Ask me again in six months and I will have better numbers.

What did you like most about working with this company?

The fact that problems surfaced upward before they became crises. I have worked on enough vendor engagements to know that the ability to manage upward — to raise bad news early rather than bury it — is genuinely rare. This team did it consistently.

Would you recommend this company to others, and would you work with them again?

Absolutely. We are scoping a second engagement and I expect this to become a multi-year partnership. For anyone in the Fashion & Apparel space looking for serious AR/VR Development delivery, I would put them at the top of the evaluation list.

Please describe your company, your role, and the industry you operate in.

We are a Information Technology company based in Dublin, Ireland. My role as VP of Engineering at Shannon Tech Solutions Ltd means I sit at the intersection of business goals and technical delivery — which means I care a lot about vendors who can translate between both.

What specific problem or business challenge led you to hire this company?

A competitor move accelerated our timeline by six months. A IoT Development investment that had been planned for next year suddenly needed to happen now. Internal build was not viable — we needed to find the right external team quickly.

What services did the company provide for your project?

The stated scope was IoT Development delivery. In practice they also contributed to product strategy conversations, flagged gaps in our requirements, and produced integration documentation that our partner vendors later told us was unusually thorough.

Why did you choose this company over other providers you considered?

A peer in the Information Technology sector had used them for a similar IoT Development engagement and recommended them without qualification. Our own due diligence confirmed the picture they described. The combination of domain knowledge and delivery track record made the decision straightforward.

How clearly did the company understand your requirements and business goals?

Well. They pushed back on areas where our requirements were vague or poorly thought through and helped us arrive at something more considered. That consultative approach during discovery is not universal and it made a real difference to the quality of what was built.

How was your overall experience with their communication and project management?

I used to chase status updates weekly on vendor engagements. This was the first time I did not have to. Updates came consistently, problems surfaced early, and the shared project board always reflected reality rather than optimism.

Did the company deliver the project on time and within your expected budget?

On time and on budget. The estimation accuracy was the part I found most impressive — they had broken the work down thoroughly enough during discovery that the forecast held throughout rather than drifting with every scope conversation. We had one change request, and it was for scope we had added ourselves.

What tangible results or business impact have you seen since the project was completed?

The ROI case we presented to the board was intentionally conservative. We are tracking to hit the payback point in under twelve months against an eighteen-month model. The efficiency gains have exceeded the forecast, partly because the data quality the new system produces enables decisions the previous one could not support.

What did you like most about working with this company?

They kept the business objective visible throughout technical decision-making. I have worked with excellent engineers who lose the strategic thread as complexity increases. This team maintained a clear link between every architectural choice and the outcome we had agreed to achieve.

Would you recommend this company to others, and would you work with them again?

Yes. The value starts in the discovery phase — clients who invest time in that process will get the most out of the engagement. We did and it is evident in what was delivered.

Please describe your company, your role, and the industry you operate in.

East Asia Commerce KK operates in the Events & Event Management sector out of Osaka, Japan. In my role as Head of Product Development I am responsible for both the technology strategy and day-to-day delivery. We hold our vendors to the same standards our clients hold us to.

What specific problem or business challenge led you to hire this company?

Compliance requirements in our Events & Event Management space changed and the deadline was set by our regulator, not by us. The Mobile App Development work required was specialist enough that pulling our internal team off the product roadmap to do it was not an option.

What services did the company provide for your project?

Full Mobile App Development lifecycle — discovery, architecture, development across ten sprints, integration testing, performance validation, production deployment, and a four-week hypercare period. They also produced system documentation and ran structured knowledge transfer sessions for our team.

Why did you choose this company over other providers you considered?

We shortlisted five vendors. Two were eliminated immediately based on the technical proposals. Of the remaining three, this team's Mobile App Development approach was the most specific and evidenced — actual Events & Event Management reference cases, not generic slides. The reference calls confirmed what the proposal described.

How clearly did the company understand your requirements and business goals?

Well. They pushed back on areas where our requirements were vague or poorly thought through and helped us arrive at something more considered. That consultative approach during discovery is not universal and it made a real difference to the quality of what was built.

How was your overall experience with their communication and project management?

Professional and efficient. The PM had a clear view of the critical path at all times and was transparent when anything threatened it. We made one significant scope change mid-project. It was handled through a proper change request, fairly priced, and absorbed without disrupting the delivery timeline.

Did the company deliver the project on time and within your expected budget?

Yes on both. There was one sprint where a third-party API dependency introduced a one-week slip. They flagged it three weeks before it became critical, presented two options, and we agreed on one that recovered the timeline within the same sprint. That kind of foresight is the difference between good and average project management.

What tangible results or business impact have you seen since the project was completed?

We went live six weeks ago so it is early. The launch was clean, adoption is tracking ahead of plan, and the first client demo of the new platform generated a positive reaction we had not seen for the previous version. Ask me again in six months and I will have better numbers.

What did you like most about working with this company?

The post-launch engagement. Some vendors treat go-live as the end of their obligation. This team treated it as a transition to a different kind of engagement. Hypercare was substantive, documentation was genuinely useful, and they checked in proactively at thirty and ninety days.

Would you recommend this company to others, and would you work with them again?

Yes. I would specifically recommend them for Mobile App Development projects where getting the requirements right at the start is critical. That is where they earn their fees — and the downstream delivery reflects it.